A waterborne compound specifically designed for filling cracks, holes, chips, gouges and broken edges in hardwood floors prior to finishing. Pacific Filler's high solid content formula is ready to use, or can be thinned with water for full trowel filling.

---

FEATURES:

• Ready to use–easy to spread for trowel filling
• Ideal for spot filling
• May be thinned with water
• Safe to use, nonflammable
• Sands easily
• Fills the soft grain
• Helps minimize grain raise
• Available in two wood tones: oak and ash-maple-pine
• Accepts stain like wood
• Can be tinted with Universal Color tints to match custom or exotic woods
• Dries with minimum shrinkage
• Excellent adhesion, bonds tightly to wood
• Tools can be cleaned with water before compound dries

---

RECOMMENDED USES:

• Apply over bare wood before final cut
• Formulated for use with Bona Decorseal Sealer Stains, Bona Woodline DS-Stains, Bona Woodline Polyurethane, and Bona Waterborne Finish Systems
• Always prepare a test sample on a small area to determine compatibility and color acceptance

---

DIRECTIONS FOR USE:

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET #70025 FOR THIS PRODUCT.

For adhesion, remove any build-up of wax and previous finish. Thoroughly vacuum dust from cracks and holes before filling.

Use a Bona Trowel or a smooth-edged putty knife for spot filling. Work BONA PACIFIC FILLER as deep as possible into cavities. To fill and level larger holes or deeper cracks, several applications of BONA PACIFIC FILLER may be required.

For trowel filling of large areas, BONA PACIFIC FILLER may be thinned with 1 to 2 cups of water per gallon. Trowel fill before last sanding cut.

Allow sufficient drying time, 30 minutes to 2 hours, before final sanding. Always wear a mask when sanding. Higher humidity or cooler conditions will increase the drying time.

BONA PACIFIC FILLER will accept most stains, sealers and finishes in the same manner as most woods. ALWAYS PREPARE A TEST OR SAMPLE AREA TO DETERMINE COMPATIBILITY.

BONA PACIFIC FILLER is tintable with Universal Color tints, Bona Woodline DS-Stains, Bona Decorseal Sealer Stains. Use the BONA PACIFIC FILLER that is closest in color to the floor being finished.

NOTE: Do not use wood bleach over BONA PACIFIC FILLER. The bleach may bubble and damage the filler.

CLEAN UP:
Clean tools with water before compound hardens.

SPECIFICATIONS/PHYSICAL DATA:
Physical Characteristics:
Ingredients - Inorganic fillers, water, binders, pigments
Color - Oak - light brown; Ash-Maple-Pine - lighter brown
Odor - Mild latex odor
Stability - 1 year shelf life
Solids - 65-75%
Weight - 13.3 lbs./gallon
VOC Compliant - Does not exceed 250 grams per liter (2.1 lbs. per gallon VOS)

Application Characteristics:
Drying Time - 30 minutes to 2 hours, depending on environmental conditions (temperature and humidity), coverage rate, and size of cracks and holes.
Coverage - 600-800 square feet per gallon
Application Tools - Putty knife, Bona Trowel
Packaging - 1-gallon plastic container, 3 1/2- gallon plastic container